Automated Plant Maintenance Setup

2024-03-11 | By M5Stack

License: General Public License Bluetooth / BLE Wifi Arduino M5Stack

* Thanks for the source code and project information provided by @Justin, Jey yagheswar, Shawn

Story

Living in an Urban Society, our team have always thought of how we could utilize our space to the maximum and also contribute to the fight against climate change since it has impacted the world negatively over the years. Farmers are also having a tough time maintaining the health of many plants as well which led us to invent an automated plant maintenance setup/system in order to support them better.

Schematics

Secondary M5Stack Circuit Diagram

Main M5Stack Circuit Diagram

Code

Main M5Stack Python Code Python

Copy Code

from m5stack import *
from m5ui import *
from uiflow import *
import time
import unit

setScreenColor(0x25706c)
earth_0 = unit.get(unit.EARTH, unit.PORTB)
env2_0 = unit.get(unit.ENV2, unit.PORTA)
servo_1 = unit.get(unit.SERVO, unit.PORTC)


a = None
b = None
c = None



Humidity = M5TextBox(200, 17, "Humidity:", lcd.FONT_DejaVu18, 0xffc4c4, rotate=0)
Temperature = M5TextBox(14, 17, "Temperature:", lcd.FONT_DejaVu18, 0xff0000, rotate=0)
HumidityShow = M5TextBox(234, 42, "Text", lcd.FONT_Default, 0xFFFFFF, rotate=0)
TemperatureShow = M5TextBox(60, 42, "Text", lcd.FONT_Default, 0xFFFFFF, rotate=0)
Moisture = M5TextBox(112, 164, "Moisture:", lcd.FONT_DejaVu18, 0x00c0ff, rotate=0)
MoistureShow = M5TextBox(145, 189, "Text", lcd.FONT_Default, 0xFFFFFF, rotate=0)
rectangleHumid = M5Rect(223, 72, 50, 10, 0xFFFFFF, 0xFFFFFF)
rectangle0 = M5Rect(177, 117, 150, 5, 0xFFFFFF, 0xFFFFFF)
rectangleTemp = M5Rect(48, 72, 50, 10, 0xFFFFFF, 0xFFFFFF)
rectangle1 = M5Rect(0, 117, 150, 5, 0xFFFFFF, 0xFFFFFF)
rectangleMoist = M5Rect(134, 207, 50, 10, 0xFFFFFF, 0xFFFFFF)
circle = M5Circle(160, 120, 30, 0xFFFFFF, 0xFFFFFF)
image0 = M5Img(147, 107, "res/thumbsup.jpg", True)

import math




while True:
  HumidityShow.setText(str((str(round(env2_0.humidity)) + str('%'))))
  TemperatureShow.setText(str((str(round(env2_0.temperature)) + str('C'))))
  MoistureShow.setText(str(round(earth_0.analogValue)))
  if (env2_0.humidity) >= 50 and (env2_0.humidity) <= 80:
    rectangleHumid.setBgColor(0x33ff33)
    a = 1
  else:
    rectangleHumid.setBgColor(0xff0000)
    a = 0
  if (env2_0.temperature) >= 21 and (env2_0.temperature) <= 28:
    rectangleTemp.setBgColor(0x33ff33)
    b = 1
  else:
    rectangleTemp.setBgColor(0xff0000)
    b = 0
  if (earth_0.analogValue) >= 100 and (earth_0.analogValue) <= 1000:
    rectangleMoist.setBgColor(0x33ff33)
    c = 1
  else:
    rectangleMoist.setBgColor(0xff0000)
    c = 0
  if a == 1 and b == 1 and c == 1:
    circle.setBgColor(0x33ff33)
    image0.show()
  else:
    circle.setBgColor(0xff0000)
    image0.hide()
  if (earth_0.analogValue) <= 100:
    servo_1.write_angle(5)
    wait(2)
    servo_1.write_angle(60)
    wait(2)
    servo_1.write_angle(5)
  wait_ms(2)

Secondary M5Stack Python Code Python

Copy Code

from m5stack import *
from m5ui import *
from uiflow import *
import time
import unit

setScreenColor(0x312d2d)
pbhub1 = unit.get(unit.PBHUB, unit.PORTA)
rgb_3 = unit.get(unit.RGB, unit.PORTB)
light_3 = unit.get(unit.LIGHT, unit.PORTB)






bightness = M5TextBox(238, 151, "Text", lcd.FONT_DejaVu24, 0xf00101, rotate=270)
label1 = M5TextBox(49, 166, "Sunlight", lcd.FONT_DejaVu18, 0xf9fe00, rotate=270)
circle0 = M5Circle(160, 128, 30, 0xFFFFFF, 0xFFFFFF)
rectangle0 = M5Rect(153, 0, 13, 240, 0xFFFFFF, 0xFFFFFF)

def buttonB_wasPressed():
  # global params
  while True:
    bightness.setText(str(light_3.analogValue))
    if (light_3.analogValue) < 200:
      wait(0.1)
      pbhub1.setBrightness(0, 150)
      wait(0.1)
      pbhub1.setColor(0, 0, 3, 0x3366ff)
      wait(0.1)
      pbhub1.setColor(0, 0, 3, 0x3366ff)
    else:
      wait(0.1)
      pbhub1.setColor(0, 0, 3, 0x000000)
      wait(0.1)
    wait_ms(2)
  pass
btnB.wasPressed(buttonB_wasPressed)


while True:
  bightness.setText(str(light_3.analogValue))
  if (light_3.analogValue) < 200:
    wait(0.1)
    pbhub1.setBrightness(0, 150)
    wait(0.1)
    pbhub1.setColor(0, 0, 3, 0xff0000)
    wait(0.1)
    pbhub1.setColor(0, 0, 3, 0xff0000)
  else:
    wait(0.1)
    pbhub1.setColor(0, 0, 3, 0x000000)
    wait(0.1)
  wait_ms(2)