¡Su fuente de información para acceder a las últimas noticias de la industria electrónica!
The Serial Peripheral Interface (SPI) is popular as a simple, low-cost interface between multiple devices such as microcontrollers, sensors, and actuators.
By using a FRAM-based microcontroller instead of flash-based, designers can reduce the power required to update firmware over a LoRaWAN wireless network.
A core understanding of oscillators and their function and differences is needed to select and apply them correctly to meet design requirements.
A modular system design provides a compact solution to emerging requirements for next generation PLCs.
Use un segundo fotodiodo para aumentar el rango dinámico de un oxímetro de pulso a 16 bits.
Developers can implement the basic analog interfaces required in many wearable and IoT designs using only an MCU and a few passive components.
Los desarrolladores pueden implementar rápidamente el hardware y el software del sensor necesarios para crear soluciones sofisticadas para el mantenimiento predictivo industrial.
Utilice LDO (caídas bajas) avanzadas para maximizar la vida de la batería del sensor de IoT y reducir la complejidad y el costo.
Los sensores de temperatura de estado sólido son ideales para las aplicaciones de la IoT debido al pequeño tamaño, la precisión, la linealidad, la baja potencia y la facilidad de conexión.
IMU software determines precise position from IMU sensor data and is used in embedded applications ranging from consumer to industrial, medical, and military.
Funnel amplifiers allow high side current measurements in systems where the load’s power supply operates at a higher voltage than the measurement circuitry.
Designers can add an external secure EEPROM to a microcontroller that provides an efficient way to protect sensitive data from hackers.
Pulse oximeters require special attention to their LED drive electronics to ensure low noise and low distortion for accurate measurements.
Using a security IC and a software library, developers can employ a more efficient approach to mutual authentication required for IoT security.
A heat sink's role is in creating a larger surface area on a heat-producing device, allowing for more efficient transfer of heat out and into its surroundings.
Developers should consider these low-power processor and board solutions to implement efficient machine learning on IoT devices at the network edge.
Los desarrolladores pueden utilizar tableros de bajo costo y LED especializadas para construir un sistema de control completo de invernadero.
Using multiple tiny DC-DC regulators in a design rather than fewer larger regulators can save board space and provide improved system performance.
Second generation GNSS modules offer faster satellite acquisition and better positional accuracy while becoming easier to design in.
Los cables y conectores USB-C™ pueden soportar la potencia necesaria para un dispositivo como una computadora portátil, lo que elimina la necesidad de llevar numerosos cables para usos diferentes.