LM76002EVM-500K: 3.3V @ 2.5A, 3.5 ~ 60V in, Buck Converter


The LM76002EVM-500K evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM76002 synchronous step-down converter. The EVM operates from an 3.5V to 60V input and provides a 3.3V or 5V output at 2.5A.

The Texas Instruments LM76002EVM-500K evaluation modules (EVM) help designers evaluate the operation and performance of the LM76002 wide-input voltage buck regulator. The output voltage for the device offers configurability from 1-V to 95% of VIN, synchronous rectification, PFM, and forced PWM mode and a 300-kHz to 2.2-MHz adjustable frequency range with a 500-kHz default frequency. It also offers external frequency synchronization, power-good (PG) flag, and a precision enable to program undervoltage lockout (UVLO) and internal compensation. Built in protection includes current limit, overvoltage and undervoltage protection, and thermal shutdown. The LM76002 EVM is configured for an output voltage of 3.3 V or 5 V and a switching frequency of 500 kHz. Refer to the LM7600x data sheet for additional features, detailed description, and available options.


Manufacturer Texas Instruments
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Part Number 296-48011-ND
Eval Board Supplier Texas Instruments
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 3.3 V
5 V
Current Out 2.5 A
Voltage In 3.5 ~ 60 V
Efficiency @ Conditions >95%, 12V in, 5V @ 0.5 ~ 2.5 A
>90%, 36V in, 5V @ 1 ~ 2.5 A
>90%, 24V in, 5V @ 0.6 ~ 2.5 A
Voltage Out Range 1 ~ 95% Vin
Features Frequency Foldback
LDO Regulator(s), On-Chip
Light Load Mode
Over Current Protection
Power Good Output
Short Circuit Protection
Shutdown, Enable, Standby
Soft Start
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 500 kHz
Standby Current [Typical] 1.2 µA
Quiescent Current [Typical] 15 µA
Component Count + Extras 15 + 39
Internal Switch Yes
Design Author Texas Instruments
Application / Target Market Industrial Power
LCD TV / Monitor
Point of Load (PoL)
Standby Current [Maximum] 10 µA
Quiescent Current [Maximum] - Not Given
Main I.C. Base Part LM76002
Date Created By Author 2017-10
Date Added To Library 2018-05

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 2