71436,39 Product Spec Datasheet by Molex

View All Related Products | Download PDF Datasheet
) molexfl \_/ SHOWN WITH PEGS SHOWN WITH PEGS AND VACUUM CAP AND VACUUM CAP REVIS‘ON: ECR/ECN INFORMATION: TITLE: SHEETNO. EC No: DATE: DOCUMENT NUMBER: CREATED / REVISED BV: CHECKED BY: APPROVED BY:
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
1 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
TABLE OF CONTENTS
1.0 SCOPE
2.0 PRODUCT DESCRIPTION
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
4.0 RATINGS
5.0 PERFORMANCE
6.0 PROCESSING GUIDELINES
1.0 SCOPE
This Product Specification covers the 1.0mm pitch board-to-board plug and receptacle connectors.
2.0 PRODUCT DESCRIPTION
2.1 The 71436 plug and the 71439 receptacle connectors have been designed in accordance
with EIA standard 700 AAAB for 1.0mm two-part connectors for use with parallel printed boards.
2.1.1 All 1.0mm connectors are available with or without locating pegs.
2.1.2 All 1.0mm connectors can be supplied with a vacuum cap for robotic placement.
) molexfl \_/ PRINTED CIRCUIT BOARD PLUG CONNECTOR i E CONTACT pOINT .029 I , 7 25/ /7 *IL I I O.IO BOTTOMING SURFACE + , P NT .004 I HT O.IO _ T .004 RECEPTACLE CONNECTOR PRINTED CIRCUIT BOARD REVISION: ECR/ECN INFORMATION: TITLE: SHEET N0. EC No: DATE: DOCUMENT NUMBER: CREATED / REVISED BV: CHECKED BY: APPROVED BY:
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
2 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
2.0 PRODUCT DESCRIPTION (CONT’D)
2.2 Product Name and Item Numbers
See figure 1 and table 1.
Figure 1
PLUG CONNECTOR RECEPTACLE CONNECTOR
ITEM NO. DIM. N DIM. L ITEM NO. DIM. H
STACK HEIGHT
DIMENSION P
+0.00/-0.40 mm
+.000/-.016 Inch
71436-0*** 6.35/.250 2.30/.090 71439-0*** 5.30/.209 8.00/.315
71436-1*** 7.35/.289 3.30/.130 71439-0*** 5.30/.209 9.00/.354
71436-2*** 8.35/.329 4.30/.169 71439-0*** 5.30/.209 10.00/.394
71436-1*** 7.35/.289 3.30/.130 71439-1*** 7.30/.287 11.00/.433
71436-2*** 8.35/.329 4.30/.169 71439-1*** 7.30/.287 12.00/.472
71436-2*** 8.35/.329 4.30/.169 71439-2*** 8.30/.327 13.00/.512
71436-1*** 7.35/.289 3.30/.130 71439-3*** 10.30/.406 14.00/.551
71436-2*** 8.35/.329 4.30/.169 71439-3*** 10.30/.406 15.00/.591
Table 1
) molexfl C REVISTON: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET N0. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
3 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
2.3 Dimensions, Materials, and Platings:
See appropriate sales drawings for information on dimensions, materials, and platings.
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
3.1 See sales drawings and other sections of this specification for necessary referenced documents
and specifications.
3.2 Recognized Agency Approvals:
3.2.1 Underwriters Laboratories Inc.: File Number E29179
4.0 RATINGS
4.1 VOLTAGE
250Volts AC (RMS) (contact to contact)
4.2 CURRENT (30°C Temperature rise)
0.5 Amps maximum, all circuits wired in series ; 1.0 Amps maximum, five adjacent circuits wired
in series
4.3 TEMPERATURE
Operating: - 55°C to + 85°C
5.0 PERFORMANCE
5.1 ELECTRICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION REQUIREMENT
1 Contact
Resistance
(Low Level)
Mate connectors, measure by dry circuit:
apply a maximum voltage of 20 mV and a
current of 10 mA.
30 milliohms
MAXIMUM
[initial]
2 Contact
Resistance
@ Rated Current
Mate connectors: apply a maximum voltage
of 20 mV at rated current.
15 milliohms
MAXIMUM
[initial]
3 Insulation
Resistance Apply 250±50 VDC, measure resistance
between adjacent terminals. 100 megaohms
MINIMUM
4 Dielectric
Withstanding
Voltage
Apply 250VAC for 1 minute between
adjacent terminals. No breakdown;
) molexfl C Temperature "C Duration Mmutes REVISTON: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET No. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
4 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
5.2 MECHANICAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION REQUIREMENT
5 Terminal
Retention Force Apply axial force on terminal in housing at
rate of 25±6mm (1 ± ¼ inch) per minute. 3.9 N (0.4 Kgf)
MINIMUM retention force
6 Connector Mate
and
Unmate Forces
Mate and unmate connectors (male to
female) at a rate of 25 ± 6 mm (1 ± ¼ inch)
per minute.
Mate Force:
60g X no. of circuits maximum
&
Un-Mate Force:
23g X no. of circuits, minimum
7 Durability Mate connectors up to 100 cycles at a
maximum rate of 10mm (0.40in) per second;
rest 30 seconds minimum (when unmated).
Maximum contact resistance
change:
15 milliohms
8 Vibration
(Random)
Amplitude: 1.9mm (.076in) peak-to-peak;
Sweep: 10-55-10 Hz in one minute; Duration:
2 hours in each axis x, y and z.
Maximum contact resistance
change:
15 milliohms
&
Discontinuity < 1 microsecond
10 Shock
(Mechanical)
490 m/s2 (50g) peak saw-tooth, 11
milliseconds duration; one shock each
direction in each axis x, y and z.
Maximum contact resistance
change:
15 milliohms
&
Discontinuity < 1 microsecond
5.3 ENVIRONMENTAL REQUIREMENTS
ITEM DESCRIPTION TEST CONDITION REQUIREMENT
11 Shock
(Thermal)
Mate connectors; expose to 5 cycles of:
Temperature °C Duration (Minutes)
-40 +0/-3 30
+105 +3/-0 30
Maximum contact resistance
change:
15 milliohms
&
Visual: No Damage
12 Thermal Aging Mate connectors; expose to:
250 hours at 85 ± 2°C
Maximum contact resistance
change:
15 milliohms
&
Visual: No Damage
) molexfl C PROCESSING STEPS RECOMMENDATION COMMENTS REVIS‘ON: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET N0. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
5 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
5.3 ENVIRONMENTAL REQUIREMENTS (continued)
ITEM DESCRIPTION TEST CONDITION REQUIREMENT
27 Humidity
(Steady State)
Mate connectors: expose to a temperature of
40 ± 2°C with a relative humidity of 90-95%
for 240 hours.
Per MIL-STD-202F, Method 103B, Test
Condition A.
Maximum contact resistance
change:
15 milliohms
&
Visual: No Damage
28 Humidity
(Cyclic) Test mated connectors per MIL-STD-202F,
Method 106E, excluding steps 7a and 7b.
Maximum contact resistance
change:
15 milliohms
&
Visual: No Damage
30 Temperature Rise
and Current Cycling
Measure Temperature rise of mated
connectors at rated current after 96 hours,
then after 45 minutes ON, 15 minutes OFF
for 240 hours, and finally after 96 hours at
rated current.
Maximum Temperature rise:
30°C over ambient
Maximum contact resistance
change:
15 milliohms
36 Mixed Flowing Gas Environmental Class II, 7 days unmated. Maximum contact resistance
change:
15 milliohms
6.0 PROCESSING GUIDLINES
PROCESSING
STEPS RECOMMENDATION COMMENTS
Resistance to
Soldering Heat Peak soldering temperature to be 265 degrees C.
Maximum time within 5 degrees of peak temperature to be
40 seconds.
Note: Connectors must be dried for 8 hours @ 70°C prior to
processing at temperatures over 245°C. Connectors may
be left in the tape and reel or tubes during the drying
operation.
Appearance: No
Physical Damage
) molexfl \_/ I I I I I REVISION: ECR/ECN INFORMATION: E SHEET No. EC No DATE DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
6 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
DURABILITY
SHOCK
(MECHANICAL)
VIBRATION
MATED ENVIRONMENTAL
AND MECHANICAL MATED
ENVIRONMENTAL
DURABILITY
SHOCK
(THERMAL)
THERMAL
AGING
HUMIDITY
(CYCLIC)
) molexfl \_/ REVISTON: ECR/ECN INFORMATION: TITLE: SHEET No. EC No DATE DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: UCP2008-0856
F DATE: 2007/10/15
TITLE: PRODUCT SPECIFICATION FOR 1.0mm
BOARD-TO-BOARD CONNECTORS
7 of 7
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-71436-9999 Marc Ibarra Bob Barker Steve Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
DURABILITY
CORROSIVE ATMOSPHERE
FLOWING MIXED GAS
DISTURBANCE
UNMATED
SEQUENCE
I MATE CYCLE
MATED
SEQUENCE
DURABILITY
CORROSIVE ATMOSPHERE
FLOWING MIXED GAS
DISTURBANCE
I MATE CYCLE

Products related to this Datasheet

CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN RCPT 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD
CONN PLUG 64POS SMD GOLD