EUR | USD

HSEC8-1xxx-xx-xx-DV-x-xx Drawing

Samtec Inc.

View All Related Products | Download PDF Datasheet

Datasheet

THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
HSEC8-1XXX-XX-XX-DV-X-XX
ROW SPECIFICATION
(SEE TABLE 9, SHT 3)
-01: 1.57 [.062] CARD
-03: 2.36 [.093] CARD
(10-100 POS, MULTIPLES OF 10 ONLY)
(-K & -TR ONLY FOR OPTION 2)
(USE RHSEC8-XXX-03-DV-XX)
(SEE NOTE 7 & 10)
PLATING SPECIFICATION
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" GOLD TAIL)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
**-PE: PASS THROUGH (SHT 7, FIG 7)
(10, 13, & 20 POS ONLY)
(-A OPTION ONLY)
(NOT AVAILABLE WITH ANY OTHER OPTION
2, EXCEPT -K AND/OR -TR)
**-BL: BOARD LOCK (SHT 5, FIG 5) (SEE NOTE 11)
(-A OPTION ONLY)
**-GR: GUIDE RAILS (SHT 6, FIG 6)
(10-60 POS, MULTIPLES OF 10 ONLY)
(SEE NOTE 11)(-TR PACKAGING ONLY)
-WT: WELD TAB (SHT 7, FIG 8)
(-A OPTION ONLY)
**-L: LATCHING (SHT 4, FIG 4)
(13, 25, 37, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
**-L2: ECDP LATCHING (SHT 8, FIG 9)
(09, 13, 25, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
-K: POLYIMIDE FILM PAD (SEE SHT 2, FIG 3)
-TR: TAPE & REEL
(09 THRU 70 POS ONLY)
(LEAVE BLANK FOR TRAY)
-10, -20, -30 (SEE FIG 1)
■-09, -13, -25, -37, -49, -40, -50, -60, -70,
-80, -90, -100 (SEE FIG 2, SHT 2)
(LEAVE BLANK FOR NO ALIGNMENT PIN,
USE XHSEC8-XXX-01-DV-LC, NOT
AVAILABLE FOR CARD THICKNESS -02 & -03
SEE FIG 10, SHT 3)
-A: ALIGNMENT PIN
(USE XHSEC8X-XXX-XX-DV-A)
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
= AVAILABLE ONLY WITH END OPTIONS -BL, -WT, & -L2
(No OF POS x 0.800 [.0315]) + 1.400[.0551]
REF
P" REF
"Q" REF
"T"' REF
(No OF POS x 0.800 [.0315]) + 4.600 [.1811]
1.126
0.800
±0.100
.0315
±.0039
(TOL NON ACCUM)
(No OF POS -1 ) x 0.800 [.0315]
±0.100
2.70 .106
REF
"A"
"A"
01
59
60
02
1.12
REF (TYP)
.044
1.32
REF
.052
(2 PLCS)
3.60 .142
REF
7.80 .307
REF
(No OF POS x 0.800[.0315]) + 2.200[.0866]
REF
POSITION #1
INDICATOR
XHSEC8X-XXX-XX-DV-XX
C
L
1.50 .059
REF
0.800
±0.100
.0315
±.0039
(TOL NON ACCUM)
((No OF POS -1 ) x 0.800 [.0315])
±0.08
C
L
C
"Y"
0.20[.008]
7.98±0.15 .314±.006
(TYP)
"W" REF
"V"
3.03 .119
REF
2.92 .115
REF
SECTION "A"-"A"
C-188-XX-XX
C
L
SEE TABLE 1
(SOME FEATURES NOT
SHOWN FOR CLARITY)
SEE NOTE 12
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
FIG 1
FOR POSITIONS -10, -20 & -30
HSEC8-130-01-XX-DV-A SHOWN
(SOME FEATURES NOT SHOWN FOR CLARITY)
=(SEE TABLE 9, SHT 3)
(SEE NOTE 12)
C
C
L
+0.09[.004]
-0.26[.010]
C
C
C
C
C
C
No OF POSITIONS (PER ROW)
CARD THICKNESS
OPTION 2
OPTION 1
-DV: DOUBLE VERTICAL
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.3 [.01] 2
.XX:
.13 [.005]
.XXX:
.051 [.0020]
MATERIAL:
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
1
SHEET SCALE: 2.5:1
INSULATOR: LCP,
COLOR: -01
CARD THICKNESS
BLACK,
-02 & -03
CARD THICKNESS
NATURAL
CONTACT: BeCu
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS.
4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP.
5. ASSEMBLIES TO BE PACKAGED IN TRAYS, UNLESS -TR IS SPECIFIED.
6. NOTE DELETED
.
7.
MATING EDGE CARD THICKNESS TOLERANCE TO BE ±0.15 [.006] OF NOMINAL
.
8. NOTE DELETED.
9. NOTE DELETED.
10.
MATING CARD MUST HAVE LEAD-IN. SEE SAMTEC FOOTPRINT FOR SPECIFICATIONS.
11. L, L2, & BL IS NOT APPLICABLE FOR GUIDE RAIL TYPE USE. GR NOT APPLICABLE FOR L,
L2, OR BL TYPE USE.
12. CORNER VOIDS AT VENDOR DISCRETION, AND MAY OR MAY NOT BE PRESENT.
13. MEASURE DIMENSION WITH LATCH IN LOCKED, PERPENDICULAR POSITION.
14. VOID WIDTH, LOCATION, AND FREQUENCY TO BE AT VENDORS DISCRETION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION BT
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No OF POS x 0.800[.0315]) + 7.800[.3071]
REF
"D" REF
"A"
REF
"G"
REF
"B" SPACES @ .800 = "C"
±0.100
4.00 .157
(No OF POS + 3) x 0.800[.0315]
±0.100
2.70 .106
REF
01
02
119
120
C
((No OF POS + 6) x 0.800[.0315]) + 0.600[.0236] REF
[(No OF POS + 3) x 0.800[.0315]
0.100
C
L
C
"R"
"S"
"H"
0.51 .020
FIG 3
-K OPTION
(SOME FEATURES NOT SHOWN FOR CLARITY)
C
K-DOT-.XXX-.XXX-.XXX
"K"
8.11 .319
13.83±0.15
.545±.006
"U"
0.13
FIG 2
FOR POSITIONS ■ **-09, **-13, **-25, **-37,
-40, **-49, -50, -60, -70, -80, -90, -100
HSEC8-160-01-XX-DV-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SOME FEATURES NOT SHOWN FOR CLARITY)
IN-PROCESS
(** =
AVAILABLE ONLY WITH
-01 CARD THICKNESS)
■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT & -L2
C
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
2
SHEET SCALE: 2.25:1
REVISION BT
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
7.80 .307
REF
C
L
FIG 10
**NON-ALIGNMENT PIN OPTION
HSEC8-130-01-XX-DV SHOWN
(
DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
0.635 .025
MAX
3
MAX SWAY
(TYP)
C
C-188-XXX-X IN-PROCESS VIEW
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
3
SHEET SCALE: 2:1
REVISION BT
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No OF POS x 0.80[.0315]) + 18.40[.724] REF
"C"
"C"
"D"
"D"
RHSEC8-XXX-01-DV-XX-L
0.25 .010
REF
1.59 .063
(No OF POS x 0.80[.0315]) + 14.90[.587]
2
MAX SWAY
(EITHER DIRECTION)
SECTION "C"-"C"
FIG 4
**-L: LATCHING OPTION
HSEC8-137-01-XX-DV-A-L SHOWN
AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY
(NOT AVAILABLE FOR -GR TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
C-188-02-X
C
0.64 .025
REF
SECTION "D"-"D"
WT-25-02-T
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
4
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION BT
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"E"
REF
"E"
"E"
"F"
"F"
"H"
"H"
1.48 .058
0.64 .025
REF
SECTION "H"-"H"
WT-25-02-T
SECTION "F"-"F"
2.1±0.40
.083±.016
12.20 .480
REF
1.325 .0522
0.25 .010
REF (TYP)
"F"
2
MAX SWAY
(EITHER DIRECTION)
SECTION "E"-"E"
RHSEC8-XXX-01-DV-XX-BL
LTC-04
C-188-02-X
C
FIG 5
**-BL: BOARD LOCK OPTION
HSEC8-160-01-XX-DV-A-BL SHOWN
(NOT AVAILABLE FOR -GR TYPE USE)
(FOR -09, -13, -25, 37, -40, -49, -50, -60, -70, -80, -90 & -100
POSITIONS DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(FOR -10, -20 & -30 POSITIONS DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(AVAILABLE IN ALL POSITIONS)
C
C
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
5
SHEET SCALE: 2.5:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION BT
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
2.30
REF
.090
11.75 .463
REF
"J"
"J"
C-188-02-X
RHSEC8-XXX-01-DV-XX-GR
0.70
REF
.027
4.40 .173
REF
1.75 .069
REF
SECTION "J"-"J"
FIG 6
**-GR: GUIDE RAILS OPTION
HSEC8-160-01-XX-DV-A-GR SHOWN
AVAILABLE IN -10, -20, -30, -40, -50, & -60 POSITIONS ONLY
(NOT AVAILABLE FOR -L; -BL TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
6
SHEET SCALE: 2:1
REVISION BT
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"J"
REF
"L"
"L"
FIG 8
-WT: WELD TAB OPTION
HSEC8-160-01-XX-DV-A-WT SHOWN
AVAILABLE IN ALL POSITIONS
(-A OPTION REQUIRED)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
RHSEC8-XXX-XX-DV-A-WT
"F"
(SEE TABLE 4, SHT 5)
0.25 .010
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
C-188-02-X
C
1.48 .058
0.64 .025
REF
SECTION "L"-"L"
WT-25-02-T
C
(No OF POS x 0.800 [.0315])
+ 7.000 [.2756] REF
(NO OF POS X 0.80[.032])
+ 4.60[.18] REF
"G"
"G"
C
L
HSEC8-XX-01-DV-A-PE
SECTION "G"-"G"
C-188-01-X
FIG 7
**-PE: PASS THROUGH OPTION
HSEC8-120-01-XX-DV-A-PE SHOWN
AVAILABLE IN -10, *-13 & -20 POSITIONS ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SOME FEATURES NOT SHOWN FOR CLARITY)
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
*-13 IS A ONE BANK PART
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
7
SHEET SCALE: 2.5:1
REVISION BT
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
(No. OF POS X 0.80[.031]) + 13.66 [.538]
REF
RHSEC8-XXX-01-DV-XX-L2
0.25 .010
REF (TYP)
(No. OF POS X 0.80[.031]) + 8.59 [.338]
2
MAX SWAY
(EITHER DIRECTION)
"M"
"M"
FIG 9
**-L2: ECDP LATCHING OPTION
HSEC8-125-01-XX-DV-A-L2 SHOWN
(AVAILABLE IN 9, 13, 25, & 49 POS ONLY)
(NOT AVAILABLE FOR -GR TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
C-188-02-X
C
0.64 .025
REF
1.48 .058
SECTION "M"-"M"
WT-25-09-X
C
(NO OF POS X 0.800[.031]) + 11.090 [.4366] REF
1.50 .059
REF
'N'
DETAIL 'N'
SCALE 10 : 1
BOTH WT'S LANCE SHOULD
FACE TO OUTSIDE
SHEET OF
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/24/03
8
8
SHEET SCALE: 3:1
REVISION BT
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322

Products

.8MM HIGH SPEED DUAL VERTICAL MO
Cantidad disponible678
Precio por unidad3.72
.8MM HIGH SPEED DUAL VERTICAL MO
Cantidad disponible854
Precio por unidad5.16
CONN EDGE DUAL FMALE 26POS 0.031
Cantidad disponible680
Precio por unidad3.97
CONN EDGE DUAL FMALE 80POS 0.031
Cantidad disponible385
Precio por unidad5.64
CONN EDGE DUAL FMALE 40POS 0.031
Cantidad disponible603
Precio por unidad3.98
CONN EDGE DUAL FMALE 50POS 0.031
Cantidad disponible1238
Precio por unidad4.22
CONN EDGE DUAL FMALE 60POS 0.031
Cantidad disponible109
Precio por unidad4.34
CONN EDGE DUAL FMALE 80POS 0.031
Cantidad disponible173
Precio por unidad4.45
CONN EDGE DUAL FMALE 80POS 0.031
Cantidad disponible173
Precio por unidad4.98
CONN EDGE DUAL FMALE 120POS .031
Cantidad disponible371
Precio por unidad7
CONN EDGE DUAL FMALE 100P 0.031
Cantidad disponible761
Precio por unidad5.07
CONN EDGE DUAL FMALE 74POS 0.031
Cantidad disponible1153
Precio por unidad4.27
CONN EDGE DUAL FMALE 100P 0.031
Cantidad disponible285
Precio por unidad5.44
CONN EDGE DUAL FMALE 120P 0.031
Cantidad disponible529
Precio por unidad6.02
CONN EDGE DUAL FMALE 80POS 0.031
Cantidad disponible172
Precio por unidad6.74
CONN EDGE DUAL FMALE 20POS 0.031
Cantidad disponible1085
Precio por unidad4.11
CONN EDGE DUAL FMALE 100POS .031
Cantidad disponible329
Precio por unidad5.73
.8MM HIGH SPEED DUAL VERTICAL MO
Cantidad disponible220
Precio por unidad4.38
.8MM HIGH SPEED DUAL VERTICAL MO
Cantidad disponible267
Precio por unidad4.65
.8MM HIGH SPEED DUAL VERTICAL MO
Cantidad disponible200
Precio por unidad4.77